The Styro build technical section has been designed to give a greater depth of information on a variety of subjects. 

If you are unable to find the specific detail you are looking for, please do not hesitate in contacting our technical department who will be happy to help. 

Email technical@styrobuild.co.uk or phone 01580-767701

Please feel free to view or download the Styrobuild Technical Pack:-

Styro Build Technical pack is under review and will be available shortly.

To download the above files to your own computer, right-click on the appropriate link and then choose
"Save Target As", or similar, depending on your choice of web browser.

Technical Datasheet for the Sunbloc System - Standard blocks only Styro Build Technical Data width  length  250 1.200 mm       Material wall panel  crossbridge   Moulded EPS, fire retardant, density c. 30g/l  Moulded EPS bridges Weight Weight per unit Weight per unit sq.m Weight of wall, dense concrete fill, unfinished / sq.m Weight of wall, dense concrete fill, both sides plastered / sq.m   800 g  3,200 g  320 kg  355 kg        Quantity of concrete / sq.m 132 L        Thermal insulation U-value W/m²K 15mm internal plaster, 10mm proprietary render Wall without finishes   0.26  0.26        Wall surface temperature - Internal room temperature + 20°C Outside temperature -10°C Outside temperature -15°C Outside temperature +60°C     18.9°C  18.7°C  21.5°C        Carbon dioxide emissions based on heat loss/sq.m wall area per annum, using oil central heating 7.8 kg        Dewpoint analysis - Theoretical max. condensation during winter Recorded figures Drying out in summer   96 g/m²  0 g/m²  561 g/m²        Fire performance (DIN 4102) Wall plastered internally, proprietary render externally F30 -AB        Sound reduction : both wall sides plastered Calculated Measured   33 dB  35 dB